The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.
The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
IEEE 802.3af Power over Ethernet (PoE)
Model 065-1050SC:
1 Auto-MDIX twisted-pair port meeting
IEEE 802.3 10BaseT & IEEE 802.3u 100BaseTX standard specifications;
Category 5 or better cable, 100 meters maximum distance for 100BaseTX,
Category 3 or better cable, 100 meters maximum distance for 10BaseT
Model 065-1050SC:
Power, PoE, TP Link/Act, 100,
FX Link/Act, FDX/COL, 4W, 7W, 15.4W,
Power Bad Nine LEDs total
Model 065-1052SC:
FX Link/Act, FX FDX/Col, TX Link/Act, TX 100,PSE Power Good,
PSE Power Bad, Power Six LEDs total
Latency: <4.5 µs (LIFO).
Throughput @ 100Base: 148,810 pps (64-byte packets)
Type: LED
Wavelength: 1300 nm nominal (1270 nm maximum, 1380 nm minimum)
Maximum Output Power: - 14.0 dBm
Minimum Output Power: - 20.0 dBm
Sensitivity: -33.0 dBm
Maximum Input Power: - 8.0 dBm
Link Power Budget: 13.0 dB
Type: MQW Laser
Wavelength: 1300 nm nominal (1260 nm maximum, 1360 nm minimum)
Maximum Output Power: - 7.0 dBm
Minimum Output Power: - 15.0 dBm
Sensitivity: -34.0 dBm
Maximum Input Power: - 7.0 dBm
Link Power Budget: 19.0 dB
Type: MQW Laser
Wavelength: 1300 nm nominal (1261 nm maximum, 1360 nm minimum)
Maximum Output Power: - 5.0 dBm
Minimum Output Power: - 12.0 dBm
Sensitivity: -35.0 dBm
Maximum Input Power: - 5.0 dBm
Link Power Budget: 23.0 dB
Type: MQW Laser
Wavelength: 1300 nm nominal (1270 nm maximum, 1350 nm minimum)
Maximum Output Power: + 3.0 dBm
Minimum Output Power: - 3.0 dBm
Sensitivity: -37.0 dBm
Maximum Input Power: - 0.0 dBm
Link Power Budget: 34.0 dB
Models 065-1050ST, 065-1050SC, 065-1050SM, 065-1050SMED, 065-1050SMXLD:
Case dimensions: 6.22"W x 5.24"D x 1.57"H (158mm x 133mm x 40mm)
Fiber connector protrusion varies with model.
Weight: 1.66 pounds (0.75 kilograms)
Model 065-1052SC:
Case dimensions: 3.70"L x 2.77"W x 1.03"H (94mm x 70.3mm x 26.2mm)
Fiber connector protrusion varies with model.
Weight: 0.5 pounds (0.23 kilograms)
Models 065-1050ST, 065-1050SC, 065-1050SM, 065-1050SMED, 065-1050SMXLD:
Maximum Wattage: 24 Watts
PSE Power Feed Support: "Endpoint" via TP pin 1, 2, 3, 6
Maximum PoE Wattage Deliverable: 15.4 Watts (with a 15.4 Watt PoE device connected)
AC Input: 100 ~ 240 VAC, 50 ~ 60 Hz internal universal power supply
Model 065-1052SC:
Maximum Wattage: 4.8 Watts
PD Power Reception Support: "Endpoint" via TP pin 1, 2, 3, 6 or "Midspan" via TP pin 4, 5, 7, 8
Maximum PoE Draw: 100mA @ -48 V DC from IEEE 802.3af PSE or PoE injector
Power Supply: External, 1 Amp @ +5 V DC (when not powered via PoE)
Operating Temperature: 32°F to 122°F (0°C to 50° C)
Storage Temperature: -4°F to 158°F (-20°C to 70° C)
Relative Humidity: 5 to 90%, non-condensing
UL Listed
Lifetime
10/100 To 100FX PoE Media Converters - (PSE) Power Source Equipment -Special order
|
Part Number |
Description |
|
065-1050ST |
10/100 to 100FX MM/ST, 2 km PSE PoE Converter |
|
065-1050SC |
10/100 to 100FX MM/SC, 2 km PSE PoE Converter |
|
065-1050SM |
10/100 to 100FX SM/SC, 15 km PSE PoE Converter |
|
065-1050SMED |
10/100 to 100FX SM/SC, 40 km PSE PoE Converter |
|
065-1050SMXLD |
10/100 to 100FX SM/SC, 75 km PSE PoE Converter |
10/100 To 100FX PoE Media Converters - (PD) Powered Devices -Special order
|
Part Number |
Description |
|
065-1052ST |
10/100 to 100FX MM/ST, 2 km PD PoE Converter |
|
065-1052SC |
10/100 to 100FX MM/SC, 2 km PD PoE Converter |
|
065-1052SM |
10/100 to 100FX SM/SC, 15 km PD PoE Converter |
|
065-1052SMED |
10/100 to 100FX SM/SC, 40 km PD PoE Converter |
|
065-1052SMXLD |
10/100 to 100FX SM/SC, 75 km PD PoE Converter |
COPYRIGHT© 2012 JYE-JUANN TECHNOLOGY CO.,LTD All RIGHTS RESERVED.
Signamax台灣及遠東地區總代理，其餘未經授權者均為仿冒品，特此聲明。
Datasheet