MF-075VFM Video only Fiber converter are designed for base band video signal
transmission utilizing Multi-Mode fiber optic cable. Save money and save space.
One modular is available with two female BNC jack used for video input interface
and one ST fiber optic connector for video transmission. The other modular is
available with one female BNC jack used for video output interface and one
ST fiber optic connector for video reception. Its can extension an audio/video
single 2,000 meter far away.
Expensive video cable is no longer necessary with an video converter from
MF-075VFM. Simply install or use existing fiber optic cable for your next video installation.
• Unidirectional video transmission up to 2,000 meters on multimode fiber.
• Supports NTSC, PAL, or SECAM CCTV.
• Wideband DC to 12 MHz response for high-quality video transmission.
• Uses a single strand of 62.5 micron multimode fiber optic cable per video channel.
• No electrical or optical adjustments required
|
Interface:
|
One Video in Bnc jack Female connector
|
|
(Transmitter)
|
One ST connectors for single transmission
|
|
Interface:
|
One Video in Bnc jack Female connector
|
|
(Receiver)
|
One ST connectors for single reception
|
|
Bandwidth:
|
Video DC-12 MHz.
|
|
Impedance:
|
Video 75 ohm.
|
|
Dimensions:
|
0.78" (W) x 2.75" (l) x 0.8" (H)
|
|
Power (T):
|
DC12V 1Amp
|
|
Power (R):
|
DC12V 1Amp
|
|
Distance:
|
Video Maximum length 2 KM
|
|
Cable type:
|
6 2.5/125um Multi-Mode fiber cable
|
|
Wave length:
|
850nm
|
|
Enclosure:
|
Aluminum
|
|
Dim(FTS):
|
43.6mm (W) x 53.4mm (D) x 20mm (H)
|
|
Part Number |
Description |
|
MF-075VFM |
Video / Fiber Converter, complete kit(including transmitter and receiver) |
COPYRIGHT© 2012 JYE-JUANN TECHNOLOGY CO.,LTD All RIGHTS RESERVED.
Signamax台灣及遠東地區總代理，其餘未經授權者均為仿冒品，特此聲明。
MF-075VFM SPEC