OVERVIEW
Signamax Small Form-factor Pluggable (SFP) fiber modules come in an array of options supporting Gigabit Ethernet transmission over either multimode or singlemode fiber cable at distances up to 220 meters. They adhere to the IEEE 802.3z standards for Gigabit Ethernet fiber connectivity, and are cost-effective methods of providing changeable Gigabit Ethernet fiber optic interfaces to switches and media converters equipped with a standard SFP port. Both standard temperature range (0° C to 70° C) and hardened temperature range (-40° C to 85° C) versions are available
SPECIFICATIONS
Part Number
|
TX/RX
Spectrum
|
Light
Source
|
Link Power
Budget
|
Typical Max. Distance
|
Supply
Voltage
|
Operating
Temp.
|
065-79SXMG
|
SX 850 nm
|
VCSEL
|
9 dBm
|
550 m on 50μ fiber,
220 m on 62.5μ fiber**
|
3.3 V
|
0 ~ 70° C
|
065-79SXMG-H
|
SX 850 nm
|
VCSEL
|
9 dBm
|
550 m on 50μ fiber,
220 m on 62.5μ fiber**
|
3.3 V
|
-40 ~ 85° C
|
** Maximum distances attainable on multimode Gigabit Ethernet fiber circuits are primarily dependent upon multimode distortion, also known as modal dispersion. Larger aperture fiber optic cable allows more modes to be generated at the launch point; these modes cause the pulse width to spread across a Gigabit Ethernet bit time intervalto a point where accurate determination of data (i.e., ones and zeroes) is not possible.These are physical properties that are not specific to this product.
These properties also apply to competing products operating in the same frequency spectrum over multimode fibercable having the same modal bandwidth.
ORDERING INFORMATION
Standard Temperature Range (0° C to 70° C) Models
Part Number
|
Description
|
065-79SXMG
|
1000BaseSX SFP Module – MM/LC, 220m Span on 62.5µm Fiber / 550m Span on 50µm Fiber
|
Industrial Temperature Range (-40° C to 85° C) Models
Part Number
|
Description
|
065-79SXMG-H
|
1000BaseSX SFP Module – MM/LC, 220m Span on 62.5µm Fiber / 550m Span on 50µm Fiber
|