OVERVIEW
The Signamax Optical Fiber Distribution Box is a multi-functional tool that may be used as a transition device (e.g., demarcation point, transition point, manifold industrial outlet, etc.) in several networking environments such as industrial floor, commercial office, protected outdoor installation.
It’s ability to mount on surfaces and DIN-rails, both normal and flat, its small form factor, standard LGX mounting interface, and various cable entry ports (compression fittings, MPO adapters) make OFDB a product of choice where there is a requirement for a small yet robust optical fiber distribution hub based on connectorization and splicing technologies.
SPECIFICATIONS
Housing: Steel with Corrosive resistant black finish
Front Cover: Aluminum
Communication Ports:
OFDB-01-04: up to 12 fibers
OFDB-01-02: up to 24 fibers
OFDB-01-03: up to 24 fibers
Adapter Plates: 1 Max up to 24 fibers; LGX format
Splice Holders: 2 Max
OFDB-01-05: up to 6 fibers (12 overall)
OFDB-01-06: up to 12 fibers (24 overall)
Depth: 5.32” (135 mm)
Width: 1.18” (30 mm)
Height: 5.12” (130 mm)
OFDB-01: Flat surface, screws
OFDB-01DR: 35-mm DIN-Rail, clip
Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
Operating RH: 93% Max (non-condensing)
5-year Limited Component
10-year Signamax Base Trunk
15-year Signamax Extended Component
25-year Signamax Cabling System
DOWNLOADS
Information will be available soon
ORDERING INFORMATION
Part Number |
Description |
|
OFDB-01 |
Surface Mount Optical Fiber Distribution Box |
|
OFDB-01DR |
DIN-Rail Mount Optical Fiber Distribution Box |
|
Accessories
Part Number |
Description |
|
OFDB-01-01 |
Blank Cable Entry Port Cover with mounting screws |
|
OFDB-01-02 |
2 x MPO-A Adapter with mounting Screws |
|
OFDB-01-03 |
1 x MG12 Cable Gland Adapter with mounting Screws |
|
OFDB-01-04 |
1 x MPO-A Adapter with mounting Screws |
|
OFDB-01-05 |
Optical Fiber Splice Holder - 6 fibers with 6 OFFSS-30-60 sleeves |
|
OFDB-01-06 |
Optical Fiber Splice Holder - 12 fibers with 12 OFFSS-15-40 sleeves |
|
Adapter Plates and Splice Holders sold separately.